Alcatel-Lucent 7210 SAS E OS Configuration Manual page 154

Port Show Commands
===============================================================================
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors :
FCS Errors
SQE Test Errors
CSE
Too long Frames
Symbol Errors
===============================================================================
lldp
Syntax lldp [nearest-bridge|nearest-non-tpmr|nearest-customer] [remote-info] [detail]
Context show>port>ethernet
Description
This command displays Link Layer Discovery Protocol (LLDP) information.
Parameters
nearest-bridge — Displays nearest bridge information.
nearest-non-tpmr — Displays nearest Two-Port MAC Relay (TPMR) information.
nearest-customer — Displays nearest customer information.
remote-info — Displays remote information on the bridge MAC.
detail — Shows detailed information.
Sample Output
*A:7210-SAS# show port 1/1/3 ethernet lldp
===============================================================================
Link Layer Discovery Protocol (LLDP) Port Information
===============================================================================
Port 1/1/3 Bridge nearest-bridge
-------------------------------------------------------------------------------
Admin State
Transmit TLVs
Management Address Transmit Configuration:
Index 1 (system)
Port 1/1/3 Bridge nearest-non-tpmr
-------------------------------------------------------------------------------
Admin State
Transmit TLVs
Management Address Transmit Configuration:
Page 154
0
: 0
: 0
: 0
: 0
: 0
: rxOnly
: None
: Disabled
: rxOnly
: None
7210 SAS E Interface Configuration Guide
Sngl Collisions :
Mult Collisions :
Late Collisions :
Excess Collisns :
Int MAC Tx Errs :
Int MAC Rx Errs :
Notifications
Address
Notifications
0
0
0
0
0
0
: Disabled
: Not Configured
: Disabled