Alcatel-Lucent 7210 SAS E OS Configuration Manual page 85

Description
This command associates a counter with the specified queue and counts the number of packets
forwarded through the queue.
The no form of the command stops the counter and disassociates the counter from the queue. Before
issuing the no form of the command, ensure all accounting policies using the counter and associated
with the port are removed from the configuration.
Default
none
speed
Syntax speed {10 | 100 | 1000}
Context config>port>ethernet
Description This command configures the port speed of a Fast Ethernet port when autonegotiation is disabled. If
the port is configured to autonegotiate this parameter is ignored. Speed cannot be configured for ports
that are part of a Link Aggregation Group (LAG).
Default
100
Parameters 10 — Sets the link to 10 mbps speed.
100 — Sets the link to 100 mbps speed.
1000 — Sets the link to 1000 mbps speed.
7210 SAS E Interface Configuration Guide
Interface Configuration
Page 85