Detailed Port Output Fields - Alcatel-Lucent 7210 SAS E OS Configuration Manual

Detailed Port Output — The following table describes detailed port output fields.

Detailed Port Output Fields

7210 SAS E Interface Configuration Guide
Label
Description
Interface
Speed
Link-level
MTU
Admin State
Oper State
Duplex
Hold time up
Hold time down
IfIndex
Phy Link
Configured Mode
Network Qos Pol
Access Egr. Qos
Egr. Sched. Pol
Encap Type
A text description of the port.
The port ID displayed in the slot/mda/port format.
The speed of the interface.
Ethernet — The port is configured as Ethernet.
The size of the largest packet which can be sent/received on the Ether-
net physical interface, specified in octets.
Up — The port is administratively up.
Down — The port is administratively down.
Up — The port is operationally up.
Down — The port is operationally down.
Full — The link is set to full duplex mode.
Half — The link is set to half duplex mode.
The link up dampening time in seconds. The port link dampening
timer value which reduces the number of link transitions reported to
upper layer protocols.
The link down dampening time in seconds. The down timer controls
the dampening timer for link down transitions.
Displays the interface's index number which reflects its initialization
sequence.
Yes — A physical link is present.
— A physical link is not present.
No
network — The port is configured for transport network use.
access — The port is configured for service access.
The QoS policy ID applied to the port.
Specifies the access egress policy or that the default policy 1 is in use.
Specifies the port scheduler policy or that the default policy default is
in use.
Null — Ingress frames will not use any tags or labels to delineate a
service.
Interface Configuration
Description
Page 137