Alcatel-Lucent 7210 SAS E OS Configuration Manual page 139

Sample Output
*A:SN12345678# show port 1/1/15
===============================================================================
Ethernet Interface
===============================================================================
Description
Interface
Link-level
Admin State
Oper State
Physical Link
IfIndex
Last State Change
Last Cleared Time
7210 SAS E Interface Configuration Guide
Label
Multicast Pack-
ets Input/Output
Broadcast Pack-
ets Input/Output
Discards Input/
Output
Unknown Proto
Discards Input/
Output
LLF Admin State
LLF Oper State
Rx S1 Byte
Qinq etype
: 10/100/Gig Ethernet TX
: 1/1/15
: Ethernet
: up
: up
: Yes
: 36143104
: 03/19/2001 21:21:07
: N/A
Description (Continued)
The number of packets, delivered by this sub-layer to a higher (sub-)
layer, which were addressed to a multicast address at this sub-layer.
For a MAC layer protocol, this includes both Group and Functional
addresses. The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a multicast
address at this sub-layer, including those that were discarded or not
sent. For a MAC layer protocol, this includes both Group and Func-
tional addresses.
The number of packets, delivered by this sub-layer to a higher (sub-)
layer, which were addressed to a broadcast address at this sub-layer.
The total number of packets that higher-level protocols requested be
transmitted, and which were addressed to a multicast address at this
sub-layer, including those that were discarded or not sent.
For a MAC layer protocol, this includes both Group and Functional
addresses.
The number of inbound packets chosen to be discarded to possibly
free up buffer space.
For packet-oriented interfaces, the number of packets received
through the interface which were discarded because of an unknown or
unsupported protocol. For character-oriented or fixed-length inter-
faces that support protocol multiplexing the number of transmission
units received via the interface which were discarded because of an
unknown or unsupported protocol. For any interface that does not
support protocol multiplexing, this counter will always be 0.
Displays the Link Loss Forwarding administrative state.
Displays the Link Loss Forwarding operational state.
Displays the received S1 byte and its decoded QL value.
Displays the ethertype used for qinq packet encapsulation.
Interface Configuration
Oper Speed : 1 Gbps
Config Speed : 1 Gbps
Oper Duplex : full
Config Duplex : full
MTU : 1522
Hold time up : 0 seconds
Hold time down : 0 seconds
Page 139