Alcatel-Lucent 7210 SAS E OS Configuration Manual page 164

LAG Commands
LAG Associations Output — The following table describes LAG associations output fields.
Sample Output
A:ALA-1# show lag 5 associations
==============================================================================
Interface Table
==============================================================================
Router/ServiceId
------------------------------------------------------------------------------
Router: Base
------------------------------------------------------------------------------
Interfaces
==============================================================================
A:ALA-1#
LAG Details without MC-LAG Output — The following example displays LAG output without
MC LAG:
*A:pc5# show lag 2 detail
===============================================================================
LAG Details
===============================================================================
Description:
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------
Lag-id
Adm
Thres. Exceeded Cnt : 4
Thres. Last Cleared : 04/11/2007 02:03:49
Dynamic Cost
Configured Address
1342177282
Hardware Address
distribute
Hold-time Down
LACP
LACP Transmit Intvl : fast
Selection Criteria
Number of sub-groups: 2
System Id
Admin Key
Prtr System Id
Prtr Oper Key
-------------------------------------------------------------------------------
Port-id
Prio
Page 164
Label
Service ID
Name
Encap Val
: 2
: up
: false
: 8e:8b:ff:00:01:42
: 8e:8b:ff:00:01:42
: 0.0 sec
: enabled
: highest-count
: 8e:8b:ff:00:00:00
: 32768
: 8e:89:ff:00:00:00
: 32768
Adm Act/Stdby Opr
The service associated with the LAG.
The name of the IP interface.
The values of the port for the IP interface.
Name
LAG2West
Mode
Opr
Port Threshold
Threshold Action
Encap Type
Lag-IfIndex
Adapt Qos
Mode
LACP xmit stdby
Slave-to-partner
Forced
System Priority
Oper Key
Prtr System Priority : 32768
Primary
7210 SAS E Interface Configuration Guide
Description
Encap Val
0
: access
: up
: 0
: down
: dot1q
:
:
: active
: enabled
: disabled
: -
: 32768
: 32768
Sub-group Forced