Alcatel-Lucent 7210 SAS E OS Configuration Manual page 123

Context show
Description This command displays pool information.
Parameters
mda-id[/port] — Displays the pool information of the specified MDA.
access-app pool-name — Displays the pool information of the specified QoS policy.
service service-id — Displays pool information for the specified service.
queue-group queue-group-name — Display information for the specified queue group.
direction — Specifies to display information for the ingress or egress direction.
Output Show Pool Output — The following table describes show pool output fields.
7210 SAS E Interface Configuration Guide
Values
access-ingress, access-egress
Values
1 — 2147483647
Values
ingress, egress
Label
Type
ID
Application/Type
Pool Name
Resv CBS
Utilization
State
Start-Threshold
Actual ResvCBS
Admin ResvCBS
Pool Total
Pool Shared
Pool Resv
Pool Total In
Use
Pool Shared In
Use
Specifies the pool type.
Specifies the card/mda or card/MDA/port designation.
Specifies the nature of usage the pool would be used for. The pools
could be used for access or access uplink at egress.
Specifies the name of the pool being used.
Specifies the percentage of pool size reserved for CBS.
Specifies the type of the slope policy.
The administrative status of the port.
Specifies the percentage of the buffer utilized after which the drop
probability starts to rise above 0.
Specifies the actual percentage of pool size reserved for CBS.
Specifies the percentage of pool size reserved for CBS.
Displays the total pool size.
Displays the amount of the pool which is shared.
Specifies the percentage of reserved pool size.
Displays the total amount of the pool which is in use.
Displays the amount of the pool which is shared that is in use.
Interface Configuration
Description
Page 123