Alcatel-Lucent 7210 SAS E OS Configuration Manual page 74

Interface QoS Commands
slope-policy
Syntax slope-policy name
no slope-policy
Context config>port>access>egress>pool
config>port>access uplink>egress>pool
Description
This command specifies an existing slope policy which defines high and low priority RED slope
parameters. The policy is defined in the config>qos>slope-policy context.
qos
Syntax qos policy-id
no qos
Context config>port>ethernet>access>egress
config>port>ethernet>access>uplink
Description
This command associates a QoS policy to the port.
Parameters
policy-id — Specifies an existing QoS policy to be assigned to the port.
Page 74
Values
1 — 65535
7210 SAS E Interface Configuration Guide