Alcatel-Lucent 7210 SAS E OS Configuration Manual page 104

Eth Ring Commands
path
Syntax path {a | b} <portid> raps-tag <qtag [.qtag]>
[no] path {a | b}
Context config>eth-ring
Description This command assigns the ring (major or sub-ring) path to a port and defines the Ring APS tag.
Rings typically have two paths a and b.
The no form of this command removes the path a or b.
Default
no path
Parameters
raps-tag <qtag [.qtag]> — Specifies the VIDqtg.
description
Syntax description long-description-string
no description
Context config>eth-ring>path
Description This command adds a text description for the ring path. The no form of this command removes the
text description.
Default
""
Parameters
string — Specifies the text description up to 160 characters in length.
rpl-end
Syntax rpl-end
no rpl-end
Context config>eth-ring>path
Description
This command configures the G.8032 path as a ring protection link end. The ring must have been
declared as either a RPL owner or RPL neighbor for this command to be allowed. Only path a or
path b can be declared an RPL-end.
The no form of this command sets the rpl-end to default no rpl-end.
Default no rpl-end
Page 104
Values
Dot1q: 1-4094
Values
QinQ: 1-4094.1-4094
7210 SAS E Interface Configuration Guide