Table 30: Show Qos Schedule-Hierarchy Port Output Fields - Alcatel-Lucent 7950 Quality Of Service Manual

Generic Commands
scheduler-hierarchy port
Syntax scheduler-hierarchy port port-id [detail] queue-group queue-group-name [scheduler
scheduler-name] [ingress | egress]
scheduler-hierarchy port port-id [detail]
Context show>qos
Description This command displays scheduler hierarchy information per port.
Parameters
port-id — Specifies the port ID in the slot/mda/port format.
detail — Displays detailed information.
queue-group queue-group-name — Displays information about the specified queue group on the port.
scheduler scheduler-name — Displays information about the specified scheduler policy on the port.
ingress — Specifies to display ingress queue group information.
egress — Specifies to display egress queue group information.
Output Show QoS Scheduler-Hierarchy Port Output — The following table describes port scheduler
hierarchy fields.

Table 30: Show QoS Schedule-Hierarchy Port Output Fields

S
Q
Admin CIR/PIR:
Assigned CIR/PIR:
Offered CIR/PIR:
Consumed CIR/PIR:
scheduler-hierarchy sap
Syntax scheduler-hierarchy sap sap-id [scheduler scheduler-name] [ingress | egress] [detail]
Context show>qos
Description This command displays the scheduler hierarchy per SAP.
Parameters
sap sap-id — Specifies the SAP assigned to the service.
Page 512
Label
Displays the scheduler name.
Displays the queue ID and information.
Specifies the configured value of CIR/PIR.
Specifies the on-the-wire PIR/CIR rate given to a member by
that parent level.
Specifies the on-the-wire offered load on that member.
Specifies the amount of scheduler bandwidth used by this mem-
ber.
Description
7950 XRS Quality of Service Guide