Alcatel-Lucent 7210 SAS E OS Configuration Manual page 169

Debug Commands
lag
Syntax lag [lag-id lag-id [port port-id]] [all]
lag [lag-id lag-id [port port-id]] [sm] [pkt] [cfg] [red] [iom-upd] [port-state] [timers] [sel-
logic]
no lag [lag-id lag-id]
Context debug
Description
This command enables debugging for LAG.
Parameters
lag-id — Specifies the link aggregation group ID.
port-id — Specifies the physical port ID.
sm — Specifies to display trace LACP state machine.
pkt — Specifies to display trace LACP packets.
cfg — Specifies to display trace LAG configuration.
red — Specifies to display trace LAG high availability.
iom-upd — Specifies to display trace LAG IOM updates.
port-state — Specifies to display trace LAG port state transitions.
timers — Specifies to display trace LAG timers.
sel-logic — Specifies to display trace LACP selection logic.
7210 SAS E Interface Configuration Guide
Syntax: slot/mda/port
Interface Configuration
Page 169