Alcatel-Lucent 7210 SAS E OS Configuration Manual page 151

7210 SAS E Interface Configuration Guide
Label
MTU
IfIndex
Hold time up
Last State Change
Hold time down
Configured Mode
Encap Type
Dot1Q Ethertype
Net.Egr. Queue
Pol.
ACFC
PFC
Auto-negotiate
Egress Rate
Loopback
Loopback Time Left
Configured
Address
Hardware Address
Description (Continued)
The size of the largest packet that can be sent/received on the Ethernet
physical interface, specified in octets.
The interface's index number that reflects its initialization sequence.
The link-up dampening time in seconds. The port link dampening
timer value that reduces the number of link transitions reported to
upper layer protocols.
The last time that the operational status of the port changed state.
The link-down dampening time in seconds. The down timer controls
the dampening timer for link down transitions.
network — the port is configured for transport.
network use access — the port is configured for service access.
null — ingress frames will not use any tags or labels to delineate a ser-
vice.
dot1q — ingress frames carry 802.1Q tags where each tag signifies a
different service.
The protocol carried in an Ethernet frame.
The number of the associated network egress queue QoS policy, or
default if the default policy is used.
Indicates whether Address and Control Field PPP Header Compression
is enabled.
Indicates whether Protocol Field PPP Header Compression is enabled.
true — the link attempts to automatically negotiate the link speed and
duplex parameters.
false — the duplex and speed values are used for the link.
The maximum amount of egress bandwidth (in kilobits per second)
that this Ethernet interface can generate.
The type of loopback configured on the port, either line,internal, or
none.
The number of seconds left in a timed loopback If there is no loopback
configured or the configured loopback is latched, the value is
unspecified.
The base chassis Ethernet MAC address.
The interface's hardware or system assigned MAC address at its
protocol sub-layer.
Interface Configuration
Page 151