Alcatel-Lucent 7210 SAS E OS Configuration Manual page 87

quiet-period
Syntax quiet-period seconds
no quiet-period
Context config>port>ethernet>dot1x
Description
This command configures the period between two authentication sessions during which no EAPOL
frames are sent by the 7210 SAS.
The no form of this command returns the value to the default.
Default
30
Parameters
seconds — Specifies the quiet period in seconds.
radius-plcy
Syntax radius-plcy name
no radius-plcy
Context config>port>ethernet>dot1x
Description This command configures the RADIUS policy to be used for 802.1x authentication. An 802.1x
RADIUS policy must be configured (under config>security>dot1x) before it can be associated to a
port. If the RADIUS policy-id does not exist, an error is returned. Only one 802.1x RADIUS policy
can be associated with a port at a time.
The no form of this command removes the RADIUS policy association.
Default
no radius-plcy
Parameters name — Specifies an existing 802.1x RADIUS policy name.
7210 SAS E Interface Configuration Guide
Values
1 — 3600
Interface Configuration
Page 87