Alcatel-Lucent 7210 SAS E OS Configuration Manual page 149

Sample Output
A:ALA-48# show port 1/3/1 detail
===============================================================================
...
===============================================================================
Ethernet-like Medium Statistics
===============================================================================
Alignment Errors :
FCS Errors
SQE Test Errors
CSE
Too long Frames
Symbol Errors
*A:ALU-SAS#
===============================================================================
...
Meter Statistics
===============================================================================
-------------------------------------------------------------------------------
Ingress Meter
For. InProf
For. OutProf
Ingress Meter
For. InProf
For. OutProf
===============================================================================
*A:ALU-SAS#
7210 SAS E Interface Configuration Guide
Label
Broadcast pack-
ets input/output
Discards input/
output
Unknown proto
discards input/
output
Unknown proto
:
:
:
:
:
1 (Unicast)
:
:
9 (Multipoint)
:
:
...
The number of packets, delivered by this sub-layer to a higher (sub-)
layer,which were not addressed to a unicast or multicast address at this
sub-layer. The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a unicast or
multicast address at this sub-layer, including those that were discarded
or not sent.
The number of inbound packets chosen to be discarded to possibly free
up buffer space.
For packet-oriented interfaces, the number of packets received via the
interface that were discarded because of an unknown or unsupported
protocol. For character-oriented or fixed-length interfaces that support
protocol multiplexing, the number of transmission units received via
the interface that were discarded because of an unknown or unsup-
ported protocol. For any interface that does not support protocol multi-
plexing, this counter will always be 0.
Discards do not show up in the packet counts.
0 Sngl Collisions
0 Mult Collisions
0 Late Collisions
0 Excess Collisns
0 Int MAC Tx Errs
0 Int MAC Rx Errs
Packets
0
0
0
0
Interface Configuration
Description
:
:
:
:
:
:
Octets
0
0
0
0
0
0
0
0
0
0
Page 149