Alcatel-Lucent 7210 SAS E OS Configuration Manual page 94

Access Uplink Port Commands
collect-stats
Syntax [no] collect-stats
Context config>port>ethernet>access>uplink
config>port>ethernet>access
Description This command enables the collection of accounting and statistical data for the network interface.
When applying accounting policies, the data, by default, is collected in the appropriate records and
written to the designated billing file.
When the no collect-stats command is issued, the statistics are still accumulated by the IOM cards,
however, the CPU does not obtain the results and write them to the billing file.
If the collect-stats command is issued again (enabled), then the counters written to the billing file
will include the traffic collected while the no collect-stats command was in effect.
Default no collect-stats
queue-policy
Syntax queue-policy name
no queue-policy
Context config>port>ethernet>access>uplink
Description
This command specifies the existing network queue policy which defines queue parameters such as
CIR and PIR rates, as well as forwarding-class to queue mappings. The network-queue policy is
defined in the config>qos>network-queue context.
A default CBS is defined for the queues and this is not configurable.
Default
default
Parameters
name — Specifies an exisiting network-queue policy name.
Page 94
Sonet/SDH
OC-48
OC-12
OC-3
Loop Timed
Yes
No
No
7210 SAS E Interface Configuration Guide
Default
loop-timed
node-timed
node-timed