Alcatel-Lucent 7210 SAS E OS Configuration Manual page 105

eth-cfm
Syntax eth-cfm
Context config>eth-ring>path
Description
This command enables the context to configure ETH-CFM parameters.
mep
Syntax [no] mep mep-id domain md-index association ma-index
Context config>eth-ring>path>eth-cfm
Description This command provisions an 802.1ag maintenance endpoint (MEP).
The no form of the command reverts to the default values.
Parameters
mep-id — ppecifies the maintenance association end point identifier.
md-index — Specifies the maintenance domain (MD) index value.
ma-index — Specifies the MA index value.
ccm-enable
Syntax [no] ccm-enable
Context config>eth-ring>path>eth-cfm>mep
Description
This command enables the generation of CCM messages.
The no form of the command disables the generation of CCM messages.
ccm-ltm-priority
Syntax ccm-ltm-priority priority
no ccm-ltm-priority
Context config>eth-ring>path>eth-cfm>mep
Description
This command specifies the priority value for CCMs and LTMs transmitted by the MEP.
The no form of the command removes the priority value from the configuration.
Default
The highest priority on the bridge-port.
7210 SAS E Interface Configuration Guide
Values 1 — 81921
Values
1 — 4294967295
Values 1 — 4294967295
Interface Configuration
Page 105