Alcatel-Lucent 7210 SAS E OS Configuration Manual page 118

Hardware Commands
CPM Output — The following table describes the output fields for a CPM card.
Page 118
Label
Temperature
Temperature
threshold
Software boot
version
Software version
Time of last
boot
Current alarm
state
Base MAC address
Memory Capacity
Label
Slot
Card Provisioned
Card Equipped
Admin State
Operational
State
BOF last modified
Config file ver-
sion
Config file last
modified
Config file last
modified
Description (Continued)
Internal chassis temperature.
The value above which the internal temperature must rise in order to
indicate that the temperature is critical.
The version of the boot image.
The software version number.
The date and time the most recent boot occurred.
Displays the alarm conditions for the specific board.
Displays the base MAC address of the hardware component.
Displays the memory capacity of the card.
The slot of the card in the chassis.
The SF/CPM type that is configured for the slot.
The SF/CPM type that is actually populated in the slot.
Up — The SF/CPM is administratively up.
Down — The SF/CPM is administratively down.
— The SF/CPM is operationally up.
Up
Down — The SF/CPM is operationally down.
The date and time of the most recent BOF modification.
The configuration file version.
The date and time of the most recent config file modification.
The date and time of the most recent config file modification.
7210 SAS E Interface Configuration Guide
Description