Alcatel-Lucent 7210 SAS E OS Configuration Manual page 108

Eth Ring Commands
shutdown
Syntax [no] shutdown
Context config>eth-ring>path
config>eth-ring
Description This command administratively enables/disables the path.
The no form of this command disables/enables the path.
Default
shutdown
split-horizon-group
Syntax split-horizon-group group-name
no split-horizon-group
Context config>lag
config>port
Description This command associates a split horizon group to which this port or LAG belongs. For LAGs, all the
member ports of the LAG are added to the split horizon group. The split-horizon-group must be
configured in the config context.
The no form of this command removes the port or all member ports of the LAG from the split
horizon group.
Configuring or removing the association of the port requires the following conditions to be satisfied:
The no form of this command removes the port or all member ports of the LAG from the split
horizon group.
Parameters group-name — Specifies the name of the split horizon group up to 32 characters in length. The string
split-horizon-group
Syntax [no] split-horizon-group name-string
Context config
Description This command creates a split horizon group to be applied on ports and LAGs.
Page 108
• There are no applications associated with the port/lag (like SAPs on the port, etc.).
• The port or LAG should be administratively shutdown.
• The port should not be part of a LAG.
• To change split horizon group of a port or LAG, the old split horizon group should be first
removed from the port or LAG, and then the new split horizon group can be configured.
must be composed of printable, 7-bit ASCII characters. If the string contains special characters
(#, $, spaces, etc.), the entire string must be enclosed within double quotes.
7210 SAS E Interface Configuration Guide