Alcatel-Lucent 7210 SAS E OS Configuration Manual page 101

Eth Ring Commands
eth-ring
Syntax eth-ring ring-id
no eth-ring
Context config
Description This command configures a G.8032 protected Ethernet ring. G.8032 Rings may be configured as
major rings with two paths (a&b).
The no form of this command deletes the Ethernet ring specified by the ring-id.
Default
no eth-ring
Parameters
ring-id — Specifies the ring ID.
description
Syntax description long-description-string
no description
Context config>eth-ring
Description This command adds a text description for the ring. The no form of this command removes the text
description.
Default
"Eth ring"
Parameters string — Specifies the text description up to 160 characters in length.
guard-time
Syntax guard-time time
no guard-time
Context config>eth-ring
Description
This command configures the guard time for an Eth-Ring. The guard timer is standard and is
configurable from "x"ms to 2 seconds
The no form of this command restores the default guard-time.
Default 5 deciseconds
7210 SAS E Interface Configuration Guide
Values
128
Interface Configuration
Page 101