Alcatel-Lucent 7210 SAS E OS Configuration Manual page 133

7210 SAS E Interface Configuration Guide
Label
Duplex
Hold time up
Hold time down
Physical Link
IfIndex
Last State chg
Configured Mode
Dot1Q Ethertype
QinQ Ethertype
Net. Egr. Queue
Pol
Access Egr. Qos
Egr. Sched. Pol
Encap Type
Active Alarms
Auto-negotiate
Alarm State
Description (Continued)
Full — The link is set to full duplex mode.
Half — The link is set to half duplex mode.
The link up dampening time in seconds. The port link dampening timer
value which reduces the number of link transitions reported to upper
layer protocols.
The link down dampening time in seconds. The down timer controls
the dampening timer for link down transitions.
Yes — A physical link is present.
— A physical link is not present.
No
Displays the interface's index number which reflects its initialization
sequence.
Displays the system time moment that the peer is up.
network — The port is configured for transport network use.
access — The port is configured for service access.
Indicates the Ethertype expected when the port's encapsulation type is
Dot1Q.
Indicates the Ethertype expected when the port's encapsulation type is
QinQ.
Specifies the network egress queue policy or that the default policy is
used.
Specifies the access egress policy or that the default policy 1 is in use
Specifies the port scheduler policy or that the default policy default is
in use
Null — Ingress frames will not use any tags or labels to delineate a
service.
dot1q — Ingress frames carry 802.1Q tags where each tag signifies
a different service.
The number of alarms outstanding on this port.
True — The link attempts to automatically negotiate the link speed
and duplex parameters.
False — The duplex and speed values are used for the link.
The current alarm state of the port.
Interface Configuration
Page 133