Alcatel-Lucent 7210 SAS E OS Configuration Manual page 107

mac-address
Syntax mac-address mac-address
no mac-address
Context config>eth-ring>path>eth-cfm>mep
Description
This command specifies the MAC address of the MEP.
The no form of this command reverts the MAC address of the MEP back to that of the port (if the
MEP is on a SAP) or the bridge (if the MEP is on a spoke SDP).
Parameters mac-address — Specifies the MAC address of the MEP.
one-way-delay-threshold
Syntax one-way-delay-threshold time
Context config>eth-ring>path>eth-cfm>mep
Description
This command enables one way delay threshold time limit.
Default
3 seconds
Parameters
priority — Specifies the value for the threshold.
shutdown
Syntax [no] shutdown
Context config>eth-ring>path>eth-cfm>mep
Description This command administratively enables/disables the MEP.
The no form of this command disables/enables the MEP.
Default
shutdown
7210 SAS E Interface Configuration Guide
Values
0 — 11840
Values
6-byte unicast mac-address (xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx) of the MEP.
Using the all zeros address is equivalent to the no form of this command.
Values
0 — 600
Interface Configuration
Page 107