Alcatel-Lucent 7210 SAS E OS Configuration Manual page 113

Sample Output
Note:This CLI output is obtained only if the hardware supports "DC source failure detection".
A:7210-SAS-E> show chassis
===============================================================================
Chassis Information
===============================================================================
Hardware Data
-------------------------------------------------------------------------------
Environment Information
7210 SAS E Interface Configuration Guide
Label
Power supply
number
AC power
DC power
Over temp
Status
Name
Type
Location
Coordinates
CLLI code
Number of slots
Number of ports
Critical LED state
Major LED state
Minor LED state
Over Temperature state
Base MAC address
Part number
CLEI code
Serial number
Manufacture date
Manufacturing string
Manufacturing deviations
Time of last boot
Current alarm state
Number of fan trays
Description (Continued)
The ID for each power supply installed in the chassis.
Within range — AC voltage is within range.
Out of range — AC voltage is out of range.
Within range — DC voltage is within range.
Out of range — DC voltage is out of range.
Within range — The current temperature is within the acceptable
range.
Out of range — The current temperature is above the acceptable
range.
Up — The specified power supply is up.
Down — The specified power supply is down
: STU2597
: 7210 SAS-E-1
:
:
:
: 2
: 24
: Red
: Off
: Off
: OK
: 00:25:ba:04:b9:bc
: 3HE04410ABAC01
: IPMK310JRA
: NS1026C0341
: 06292010
:
:
: 2010/11/09 16:12:40
: alarm active
: 1
Interface Configuration
Page 113