Alcatel-Lucent 7210 SAS E OS Configuration Manual page 84

Ethernet Port Commands
Default 0x8100
Description
0x0600..0xffff — Specifies QinQ etype values.
statistics
Syntax statistics
Context config>port>ethernet
Description
This command provides the context to configure the counters associated with the egress port.
egress
Syntax egress
Context config>port>ethernet>statistics
Description This command provides the context to configure egress per queue statistics counter, it counts the total
number of packets forwarded.
queue
Syntax queue queue-id
Context config>port>ethernet>statistics>egress
Description This command enables the context to associate a counter with the egress queue identified by the
queue-id.
Default
none
Parameters
queue-id — Identifies the queue with which the counter must be associated.
packets-forwarded-count
Syntax [no] packets-forwarded-count
Context config>port>ethernet>statistics>egress
Page 84
Values 1536 — 65535, in hexadecimal or decimal notation. Ensure that the values do not
match any of the IEEE reserved ethertype values such as 0x8a88, 0x9100, and
0x9200.
Values
1 — 8
7210 SAS E Interface Configuration Guide