Extreme Networks Summit X150 Series Hardware Installation Manual page 52

1 = Ethernet management port
2 = SFP ports
3 = 10/100/1000BASE-T ports
The rear panel of the Summit X440-24x switch includes:
•
Two high-performance stacking ports with associated LEDs
•
Redundant power input connector for optional connection to the EPS-C2 External Power Module
The connecting redundant power supply cable is shipped with the power module unit. See
an EPS-C2 Chassis
•
AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
2
Figure 44: Summit X440-24x Switch Rear Panel
1 = AC power input connector
2 = Stacking ports
Summit X440-L2-24t Switch
The front panel of the Summit X440-L2-24t switch includes:
•
Twenty-four fixed autosensing 10/100/1000BASE-T ports (ports 1–24) that provide 24 Gbps of
high-density copper connectivity
•
Four unpopulated SFP ports (ports 21–24) that provide 4 Gbps of fiber connectivity. The SFP ports
support both 100BASE-FX and 1000BASE-X optical modules.
Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
•
Ethernet management port
•
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform
local management
•
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see
Summit Family Hardware Installation Guide
for more information.
3
4 = Stack number indicator
5 = Console port
6 = Combination ports
1
3 = Redundant power connector
Combination Ports and Failover.
Summit X440 Series Switch
Summit Family Switches
Installing
LEDs.
52