Installing A Summit 450 W Or 550 W Ac Power Supply - Extreme Networks Summit X150 Series Hardware Installation Manual

To allow safe handling of the switch during the installation process, make sure you have the following
available space around the rack:
•
Back: Minimum 30 inches behind the rack posts.
•
Sides: For a two-post rack installation, allow adequate space for access to the sides of the switch so
that the front mounting brackets can be attached to the switch.
The following items are provided with the Summit X480 series switch:
•
2 front mounting brackets
•
16 screws for attaching the front mounting brackets to the switch enclosure
•
2 pairs of rear mounting brackets, one shorter and one longer
You need the following additional tools and materials:
•
Four rack mounting screws
The screw size will vary based on your organization's rack system; screws are not provided.
•
Screwdriver for securing the switch to your organization's rack
The screwdriver size will vary based on the requirements of your organization's rack system.
•
AC power cord for each installed AC power supply
An AC power cord is not included with the Summit X460 series switch. You must obtain a power
supply cord that meets the requirements listed under
Switches and AC Power
•
ESD-preventive wrist strap for installing optional ports at the back of the switch
AC Power Supply Cords
An AC power cord is not included with the Summit AC power supply.
You can purchase AC power cords for use in the US and Canada from Extreme Networks or from your
local supplier. The cord must meet the requirements listed in
Powered Switches and AC Power

Installing a Summit 450 W or 550 W AC Power Supply

Warning
To prevent an electrical hazard, make sure that the AC power cord is not connected to the
power supply before you install the power supply in the power supply bay.
Caution
Make sure that the AC power supply circuit is not overloaded. Use proper over-current
protection, such as a circuit-breaker, to prevent over-current conditions.
To install a Summit 450 W or 550 W AC power supply:
1 Attach an ESD-preventive wrist strap to your bare wrist and connect the metal end to an
appropriate grounding point.
Summit Family Hardware Installation Guide
Supplies.
Supplies.
Installing Summit Family Switches
Power Cord Requirements for AC-Powered
Power Cord Requirements for AC-
252