Extreme Networks Summit X150 Series Hardware Installation Manual page 280

c Repeat steps a and b to attach the other bracket to the other side of the switch.
Figure 260: Attaching a Rack-mounting Bracket (X670 shown)
2 Slide the switch into the equipment rack.
Figure 261: Installing the Summit X670 or X770 Series Switch (X670 shown)
3 Secure the mounting bracket flanges to the rack, using screws that are appropriate for the rack.
(Rack-mounting screws are not provided.)
4 Ground the switch if grounding lug is present (X670 series switches).
a Strip 0.25 inch from the end of the AWG # 14 copper wire.
b Securely crimp the provided ring terminal onto the stripped wire.
Summit Family Hardware Installation Guide
Installing Summit Family Switches
280