For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
Note
All 48 ports can provide PoE power
•
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see
Switch
LEDs.
•
Stack number indicator showing the position of this switch in a stacked configuration
•
Serial console port used to connect a terminal and perform local management
Figure 88: Summit X450e-48p Switch Front Panel
The rear panel of the Summit X450e-48p switch
page 87) includes:
•
Slot for one of the Summit option cards listed in the following table. These port option cards allow
you to add one or two high-speed uplink ports to the switch.
Table 33: Port Option Cards for Summit X450e Series Switches
Option Card Model
XGM2-2xn option card
XGM2-2xf option card
XGM2-2sf option card
XGM2-2bt option card
•
Management port with associated LEDs
•
Two high-performance stacking ports with associated LEDs
•
Redundant power input connector for optional connection to the EPS-C chassis (Model No. 10912).
This chassis can hold up to three EPS-600LS External Power Modules (Model No. 10913). The
connecting redundant power supply cable is shipped with the EPS-C chassis.
The PoE capability of the Summit X450e-48p switch varies depending on the number of external
power modules in use. For more information, see
EPS-600LS External Power
•
AC power input socket
The power supply operates from 100 VAC to 240 VAC.
Summit Family Hardware Installation Guide
(Figure 89: Summit X450e-48p Switch Rear Panel
Type of Added Ports
10-gigabit XENPAK modules
10-gigabit XFP modules
10-gigabit SFP+ modules
Fixed 10GBASE-T copper
Summit X450e-48p Power Supplies
Module.
Summit Family Switches
Summit X450, X450a, and X450e Series
For More Information, see . . .
Summit XGM2-2xn Option Card
Summit XGM2-2xf Option Card
Summit XGM2-2sf Option Card
Summit XGM2-2bt Option Card
on
and
86