Extreme Networks Summit X150 Series Hardware Installation Manual page 344

2 Pull the cover off the terminal block
3 Identify the grounding point at the left of the terminal block
Figure 330: Connecting the Ground Wire
4 Connect the ground wire to the grounding point as follows:
a Loosen the screw enough to allow the spade terminal to slide underneath the captive square
washer (Securing the Ground
b Slide the spade terminal of the ground wire under the captive square washer.
Summit Family Hardware Installation Guide
Replacing DC Power Supplies in Summit Family Switches
(Connecting the Ground
Wire).
Wire).
(Connecting the Ground Wire).
344