Summit X450A-24X Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Figure 74: Summit X450a-24tDC Switch Rear Panel

Summit X450a-24x Switch

The front panel of the Summit X450a-24x switch includes:
•
Twenty 1000BASE-X ports (ports 1–20) that provide 20 Gbps of high-density fiber (SFP)
connectivity
•
Four combination ports (ports 21–24) using RJ-45 connectors and SFPs to provide 4 Gbps of
copper or fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
•
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see
Switch LEDs.
•
Stack number indicator showing the position of this switch in a stacked configuration
•
Serial console port used to connect a terminal and perform local management
Figure 75: Summit X450a-24x Switch Front Panel
The rear panel of the Summit X450a-24x switch
page 76) includes:
•
Slot for one of the Summit option cards listed in the following table. These port option cards allow
you to add one or two high-speed uplink ports to the switch.
Summit Family Hardware Installation Guide
Combination Ports and
Summit X450, X450a, and X450e Series
(Figure 76: Summit X450a-24x Switch Rear Panel
Summit Family Switches
Failover.
on
75