Extreme Networks Summit X150 Series Hardware Installation Manual page 272

Figure 250: Attaching Power Connection Terminals to Cables
Figure 251: Attaching ground terminal to cable
Installing the Power Supply
Caution
The handle on the Summit X650 DC power supply is not designed to be used to lift or carry
the Summit X650 series switch.
To install an 850 W DC power supply in a Summit X650 series switch:
1 If necessary, remove a blank panel from the back of the Summit X650 series switch (see
Removing a Blank Panel
Figure 252: Removing a Blank Panel
2 Verify that the power supply is right side up (see
on page 273).
Summit Family Hardware Installation Guide
on page 272).
Figure 253: Installing an 850 W DC Power Supply
Installing Summit Family Switches
SH_106
Figure 252:
272