•
Management port with associated LEDs
•
Two high-performance stacking ports with associated LEDs
•
Redundant power input connector for use with the EPS-150DC External Power Module (Model No.
10909).
The connecting redundant power supply cable is shipped with the EPS-150DC unit. See
External Power Module (with EPS-T2)
•
DC power input socket
The internal power supply operates from -36 VDC to -72 VDC.
•
Grounding lug
Note
For centralized DC power connection, this product is intended to be installed in a restricted
access location (such as a dedicated equipment room, equipment closet, or central office) in
accordance with Articles 110-16, 110-17, and 110-18 of the National Electric Code, ANSI/NFPA
70.
Figure 20: Summit X250e-48tDC Switch Rear Panel
Summit X250e-48p Switch
The front panel of the Summit X250e-48p switch includes:
•
Forty-eight fixed autosensing 10/100BASE-T PoE ports (ports 1–48). In addition to 4.8 Gbps of high-
density copper connectivity, these ports provide a full 15.4 Watts of PoE per port when used with
the EPS-600LS External Power Module.
•
Two combination ports (ports 49–50) using RJ-45 connectors and SFPs to provide 2 Gbps of
copper or fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
•
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see
Summit Family Hardware Installation Guide
for more information.
Combination Ports and
Summit X250e Series Switch
Summit Family Switches
EPS-150DC
Failover.
LEDs.
30