Connecting Network Interface Cables - Extreme Networks Summit X150 Series Hardware Installation Manual

c Insert the provided M4 screw through the ring terminal and into the grounding stud on the front
of the switch
d Securely tighten the screw.
Figure 266: Grounding a Summit X670 Series Switch
The Summit X670 and X770 series switches are shipped without installed power supplies. After the
switch is secured to the rack, install the necessary power supplies for your configuration. For
instructions, see the following sections:
•
Installing a Summit 450 W or 550 W AC Power Supply
•
Installing a Summit 450 W or 550 W DC Power Supply
Note
If you are installing a VIM4 module in the Summit X670V-48x switch, install it in the switch
before you connect the switch to power (see
Summit X480, X650, or X670 Series Switch

Connecting Network Interface Cables

Use the appropriate type of cable to connect the ports of your switch to another switch or router.
For connections to the 10GBASE-T ports on the Summit X650-24t switch, see the following table for
cable types and distances.
Summit Family Hardware Installation Guide
(#i739419/image_lj1_dvh_bm
Installing Summit Family Switches
on page 284).
on page 252
on page 254
Installing a Versatile Interface Module in a
on page 321).
284