Extreme Networks Summit X150 Series Hardware Installation Manual page 222

4 Repeat step to attach the other bracket to the other side of the switch.
Figure 192: Attaching a Rack-mounting Flange
5 Slide the switch into the equipment rack.
Figure 193: Installing the Summit X460 Series Switch
6 Secure the mounting bracket flanges to the rack, using screws that are appropriate for the rack.
(Rack-mounting screws are not provided.)
The Summit X460 series switch is shipped without installed power supplies. You can install one or two
power supplies. After the switch is secured to the rack, install the necessary power supplies for your
configuration. For instructions, see the following pages:
•
300 W AC power
•
750 W AC power
•
300 W DC power
X460 Series Switch
To install an XGM3-2sf port card, see
Summit Family Hardware Installation Guide
supply—Installing a 300 W AC Power Supply in a Summit X460 Series Switch
supply—Installing a 750 W AC Power Supply in a Summit X460 Series Switch
supply—Installing a Model 10933 or 10934A 300 W DC Power Supply in a Summit
Installing a Summit XGM3 Series Port Option
Installing Summit Family Switches
SH_197
SH_198
Card.
222