Summit X450-24T Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

•

Summit X450-24t Switch

•
Summit X450-24x Switch
Summit X450-24t Switch
The front panel of the Summit X450-24t switch includes:
•
Twenty fixed autosensing 10/100/1000BASE-T ports (ports 5–24) that provide 20 Gbps of high-
density copper connectivity
•
Four combination ports (ports 1–4) using RJ-45 connectors and SFPs to provide 4 Gbps of copper
or fiber connectivity
For more information about combination ports, see
For information about SFPS, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
•
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see
Switch LEDs.
•
Stack number indicator showing the position of this switch in a stacked configuration
•
Serial console port used to connect a terminal and perform local management
Figure 67: Summit X450-24t Switch Front Panel
The rear panel of the Summit X450-24t switch includes:
•
Slot for the Summit XGM-2xn option card, which allows you to add one or two 10-gigabit XENPAK
modules
See Summit XGM-2xn Option
•
Management port with associated LEDs
•
Two high-performance stacking ports with associated LEDs
•
Redundant power input connector for optional connection to the EPS-160 External Power Module
(Model No. 10907)
The connecting redundant power supply cable is shipped with the EPS-160 unit. See
External Power Module (with EPS-T)
•
AC power input socket
The internal power supply operates from 100 VAC to 240 VAC.
Summit Family Hardware Installation Guide
Combination Ports and
Summit X450, X450a, and X450e Series
Card.
for more information.
Summit Family Switches
Failover.
EPS-160
69