Summit X250E-24X Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Figure 11: Summit X250e-24p Switch Front Panel
The rear panel of the Summit X250e-24p switch (shown in
Panel on page 25) includes:
•
Ethernet management port with associated LEDs
•
Two high-performance stacking ports with associated LEDs
•
Redundant power input connector for use with the EPS-500 External Power Supply (Model No.
10911) with full PoE power support
The connecting redundant power supply cable is shipped with the EPS-500 unit. See
External Power Supply Unit
•
AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 12: Summit X250e-24p Switch Rear Panel

Summit X250e-24x Switch

The front panel of the Summit X250e-24x switch includes:
•
Twenty-four 100BASE-FX ports (ports 1–24) that provide 2.4 Gbps of high-density fiber
connectivity
•
Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of
copper or fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
Summit Family Hardware Installation Guide
for more information.
Combination Ports and
Summit Family Switches
Figure 12: Summit X250e-24p Switch Rear
Failover.
EPS-500
25