Summit X350-48T Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

•
Slot for one of the Summit option cards listed in the following table. These port option cards allow
you to add one or two high-speed uplink ports to the switch.
Table 14: Port Option Cards for Summit X350 Series Switches
Option Card Model
XGM2-2xn option card
XGM2-2xf option card
XGM2-2sf option card
XGM2-2bt option card
•
Management port with associated LEDs
•
Redundant power input connector for optional connection to the EPS-500 External Power Module
(Model No. 10907).
The connecting redundant power supply cable is shipped with the EPS-500 unit. See
External Power Supply Unit
•
AC power input socket
The internal power supply operates from 100 VAC to 240 VAC.
Figure 24: Summit X350-24t Switch Rear Panel

Summit X350-48t Switch

The front panel of the Summit X350-48t switch includes:
•
Forty-four fixed autosensing 10/100/1000 BASE-T ports (ports 1–44) that provide 44 Gbps of high-
density copper connectivity
•
Four combination ports (ports 45–48) using RJ-45 connectors and SFPs to provide 4 Gbps of
copper or fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
•
LEDs to indicate port status and switch operating conditions
Summit Family Hardware Installation Guide
Type of Added Ports
10-gigabit XENPAK modules
10-gigabit XFP modules
10-gigabit SFP+ modules
Fixed 10GBASE-T copper
for more information.
Summit Family Switches
For More Information, see . . .
Summit XGM2-2xn Option Card
Summit XGM2-2xf Option Card
Summit XGM2-2sf Option Card
Summit XGM2-2bt Option Card
Combination Ports and Failover.
EPS-500
36