Extreme Networks Summit X150 Series Hardware Installation Manual page 106

The Summit X650 series switch must have an installed VIM; the switch will not operate correctly
without one.
Note
The Summit X650 switches require VIM1 or VIM3 modules. Other VIM types that may appear
to be mechanically compatible with the Summit X650 switches will not function if they are
installed in these switches.
Cooling is provided by a replaceable fan module. Two power supply bays accommodate either AC or
DC power supplies.
Summit X650-24t Switch
The front panel of the Summit X650-24t switch includes:
•
Twenty-four fixed autosensing 1000/10000 BASE-T ports (ports 1–24) that provide high-density
copper connectivity
•
10/100/1000 Mbps management port
•
Serial console port used to connect a terminal and perform local management
•
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see
•
Stack number indicator
Figure 108: Summit X650-24t Front Panel
The rear panel of the Summit X650-24t switch
includes:
•
Installed VIM1 virtual interface module (VIM1-SummitStack shown) (see
for the Summit X650 Series
•
Replaceable fan tray
•
Two power supply bays for either AC or DC power supplies (see
Power Supplies)
Summit Family Hardware Installation Guide
Summit X650 Series Switch
(Figure 109: Summit X650-24t Rear Panel
Switches)
Summit Family Switches
LEDs.
on page 107)
Versatile Interface Modules
Summit 850-Watt AC and DC
106