Installing The Power Supply - Extreme Networks Summit X150 Series Hardware Installation Manual

Figure 208: Attaching Power Connection Terminals to Cables
Figure 209: Attaching ground terminal to cable

Installing the Power Supply

Caution
The handle on the Summit 300 W DC power supply is not designed to be used to lift or carry
the Summit X460 series switch.
To install a DC power supply in a Summit X460 series switch:
1 Attach an ESD-preventive wrist strap to your bare wrist and connect the metal end to an
appropriate ground point on the rack.
Summit Family Hardware Installation Guide
Installing Summit Family Switches
236