Extreme Networks Summit X150 Series Hardware Installation Manual page 47

For a description of the LEDs and their operation, see
•
Stack number indicator
Note
If you are desktop mounting Summit X440-8t switches directly on top of each other, you
must use the four rubber pads to maintain sufficient airflow around the units. See
Standing and Desktop Mount of Multiple Switches
Figure 35: Summit X440-8t Switch Front Panel
1 = Ethernet management port
2 = 10/100/1000BASE-T ports
3 = SFP ports
The rear panel of the Summit X440-8t switch provides an AC power input socket. The internal AC
power supply operates from 100 VAC to 240 VAC.
1 = AC power input connector
Figure 36: Summit X440-8t Switch Rear Panel
Summit X440-8p Switch
The front panel of the Summit X440-8p switch includes:
•
Eight fixed autosensing 100/1000BASE-T PoE+ ports (ports 1–8). In addition to 8 Gbps of high-
density copper connectivity, these ports also supports the PoE+ IEEE 802.3a standard and provide
up to 30 Watts of power per port up to a total power budget of 170 Watts.
•
Four unpopulated SFP ports (ports 9–12) that provide 4 Gbps of fiber connectivity. The SFP ports
support both 100BASE-FX and 1000BASE-X optical modules.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation
Guide.
Summit Family Hardware Installation Guide
Summit X440 Series Switch
for installation instructions.
4 = Stack number indicator
5 = Console port
6 = Stacking Ports
Summit Family Switches
LEDs.
Free-
47