Extreme Networks Summit X150 Series Hardware Installation Manual page 266

1 At the back of the cabinet, attach a rear mounting bracket to each rear post.
Figure 244: Attaching Rear Mounting Brackets—Cabinet Installation
2 Attach an ESD-preventive wrist strap to your wrist and connect the metal end to an appropriate
ground point on the rack.
3 Set the switch on a secure work surface.
4 At the front of the switch, attach a rack-mounting bracket to each side (see
the Front Mounting Brackets—Cabinet Installation
a Position the bracket with the flange at the front edge of the switch.
Figure 245: Attaching the Front Mounting Brackets—Cabinet Installation
Summit Family Hardware Installation Guide
Installing Summit Family Switches
Figure 245: Attaching
on page 266).
266