Versatile Interface Modules For The Summit X480 Series Switches - Extreme Networks Summit X150 Series Hardware Installation Manual

Figure 130: VIM3-40G4X Versatile Interface Module
1 = QSFP+ port

Versatile Interface Modules for the Summit X480 Series Switches

A VIM2 or VIM3 versatile interface module can be installed in a dedicated slot at the back of the Summit
X480 series switch to provide high speed stacking ports or 10-Gbps Ethernet ports.
VIM2-10G4X Versatile Interface Module
The VIM2-10G4X versatile interface module provides four 10-Gbps ports using XFP optical modules.
For information about the supported optical modules, refer to the most recent version of the
ExtremeXOS Hardware and Software Compatibility Matrix.
Figure 131: VIM2-10G4X Versatile Interface Module
The XFP ports are labeled S1, S2, S3, and S4. ExtremeXOS software assigns port numbers to the XFP
ports based on the switch model in which the VIM2-10G4X module is installed (see the following table).
Table 79: Port Numbers for XFP Ports on the VIM2-10G4X Module
Port Label
S1
S2
S3
S4
Summit Family Hardware Installation Guide
Summit Option Cards and Versatile Interface Modules
Summit X480-48t or Summit
X480-48xPort Number
49
50
51
51
2 = Port LEDs
Summit X480-24tPort Number
27
28
29
30
145