Hexadecimal Printing; Store Mode - IBM 4247 A00 User Manual

Hexadecimal Printing

You can set hexadecimal printing to either of the following values:
v No (default)
v Yes
If set to YES, any character sent to the printer will be printed in a hexadecimal
value. This lets you see a readable printout of all characters sent by the host to the
printer even if they are control code characters (for example, ESC, DC4, CR, LF).
To select Hexadecimal Printing, follow these steps:
1. Press Menu/Enter. The message PRINT OUT=NO displays.
2. Press
3. To exit from Program Configuration, press

Store Mode

Once you made changes to any of the Program Configuration values, you have
three choices available for saving them:
Quit (default) Exit Program Configuration mode and no changes are saved in
Save
Current
To select Store Mode in either of two ways:
1. Press Menu/Enter and the message STORE=QUIT displays.
2. If you want to exit without saving the new values, press Menu/Enter.
3. If you want to save the new values, press
4. Press Menu/Enter to save the new values.
120
4247 Printer Model A00 User's Guide
If you want to save the new value, press
value is stored in NVM) or STORE=CURRENT (new value remains valid until the
printer is powered off (O)). Press Menu/Enter to save the new value.
until the message HEX DUMP=NO displays. If you want to get a
hexadecimal printout, press
displays. If you want to exit without saving the new value, press Menu/Enter.
If you want to save the new value, press
value is stored in NVM) or STORE=CURRENT (new value remains valid until the
printer is powered off (O)). Press Menu/Enter to save the new value.
If you save HEX DUMP=YES, all characters will print in hex until you reset the value
to NO.
NVM. All previous values remain valid.
Exit Program Configuration mode and save new values in NVM.
Exit Program Configuration mode and the new values remain valid
until the printer is powered off (O).
or
until the message STORE=QUIT displays.
Press
(new values are stored in NVM) or STORE=CURRENT (new values remain valid until
the printer is powered off (O)).
to select either STORE=SAVE (new
or
to select HEX DUMP=YES.
or
and the message STORE=QUIT
to select either STORE=SAVE (new
or
to select either STORE=SAVE
or