Printing Power On Configuration Setup - IBM 4247 A00 User Manual

Printing Power On Configuration Setup
Once you have made all your configuration changes, IBM recommends that you
print your changes and save the printout for future reference.
To print the power on configuration:
1. Ensure the printer is powered off (O).
2. Press and continue to hold Menu/Enter while powering on (|) the printer until
3. After start-up is complete, release Menu/Enter and the message PRINT OUT=NO
4. To print the current settings on the printer, press . The message PRINT OUT=YES
Your printout will look similar to this sample. This sample depicts the default
settings.
new values selected will be stored in NVM. If YES is selected, you exit from the
Power On Configuration Menu and all values are restored to those set at the
factory.
(1) the message STARTING UP appears, (2) the boxes on the operator panel
display are solidly filled in, and (3) the printhead stops. This takes about fifteen
seconds. Do not release this key or press any other keys until this completes.
displays.
displays and the power on configuration setup printout starts printing.
Chapter 4. Configuring Your Printer
105