Null (Esc Nul); Bell (Esc Bel); Backspace (Esc Bs); Horizontal Tab (Esc Ht) - IBM 4247 A00 User Manual

Control
ESC R
ESC S
ESC T
ESC U
ESC W
ESC X
ESC Y
ESC Z
ESC \
ESC ]
ESC |
ESC _
ESC d
ESC e
ESC [ - (See note)
ESC [ @
ESC [ I (See note)
ESC [ K
ESC [ T (See note)
ESC [ d (See note)
Note: This command is only available in Native 4247 or 2381 emulation mode.

Null (ESC NUL)

The printer ignores the NUL control by itself.

Bell (ESC BEL)

This control causes the audible alarm to sound, if enabled. The alarm may be
disabled or enabled from the Configuration menu.

Backspace (ESC BS)

This control moves the print position horizontally one character width to the left. If
the current print position is at the left margin, the printer ignores this command.

Horizontal Tab (ESC HT)

1B 00
1B 07
1B 08
1B 09
Hex Name
1B 52 Set Default Tabs
1B 53 Begin Subscript/Superscript
1B 54 End Subscript/Superscript
1B 55 Set Print Direction
1B 57 Double-Wide Continuous Mode
1B 58 Set Horizontal Margins
1B 59 Dual Density Bit Image Graphics Type 2
1B 5A High Density Bit Image Graphics
1B 5C Print All Characters
1B 5D Reverse Line Feed
1B 5E Print Single Character
1B 5F Continuous Overscore
1B 64 Relative Move Right
1B 65 Relative Move Left
1B 5B 2D Select Line Scoring
1B 5B 40 Set Presentation Highlights (SPH)
1B 5B 49 Set Font Global (SFG)
1B 5B 4B Set Initial Conditions (SIC)
1B 5B 54 Select Code Page (SCP)
1B 5B 64 Set Print Quality (SPQ)
Appendix D. Personal Printer Data Stream (PPDS)
193