Setting Push-Pull Selector - IBM 4247 A00 User Manual

Figure 22. Forms Guide Deflector
3. Grasp the forms guide deflector with one hand and the plastic rib on the forms
4. While pulling the forms guide deflector and the plastic rib apart, move first the
5. Close the forms guide and the top cover.

Setting Push-Pull Selector

See Table 8 for the correct setting you will make for your selected forms path.
Table 8. Setting the Push-Pull Selector
46
4247 Printer Model A00 User's Guide
guide with the other hand.
right side then the left side of the forms guide deflector to be either above or
below the metal pins. The correct position is noted in Table 7 on page 44.
Figure 22 shows the forms guide deflector being moved from the closed (pull)
position to the open (push) position.
Rear Push
with Manual
Push-Pull
Push
Selector
Dual Push
Rear Pull
with Manual
Push Push
Push Pull
Pull Pull