Installing Printer Drivers - IBM 4247 A00 User Manual

DANGER
To attach a serial cable:
1. Power off (O) the printer. Disconnect the power cord from the receptacle.
2. Standing behind the printer, insert the serial interface cable into the upper
3. Tighten the two locking screws to hold the cable in place.
4. Refer to your computer system documentation for information on attaching the
5. After you complete the attachment of the computer end of the interface cable,
6. Power on (|) the printer.

Installing Printer Drivers

The IBM 4247 Printer is supported by the following operating systems or
environments:
v AIX version 3.2.5 and later
v OS/400 version 2.3 Host Print Transform
v OS/2 version 2.1 and later
v Windows version 3.0 and later
<3> To avoid personal risk, do not install or reconfigure a communication
port or a teleport during a lightning storm.
connector at the bottom left of the printer.
cable to your computer.
connect the power cord to the printer and to the electrical receptacle.
Chapter 5. Attaching Your Printer
125