IBM 4247 A00 User Manual page 71

6. Using care not to damage the plastic strip on the paper bail, insert the ends of
the bail into the printer frame as shown in Figure 26.
Figure 26. Installing the Paper Bail
7. Rotate the paper bail, moving the top toward the rear, as shown in Figure 27.
Ensure the paper bail snaps into place.
e61z5303
Figure 27. Rotating the Paper Bail into Position
8. Ensure that the paper bail (level 1 or level 2) is installed correctly. Press on the
areas that are identified by arrows in Figure 28 on page 50. If your printer has
a level 1 paper bail, ensure the paper bail is snapped into the closed position.
See Figure 28 on page 50.
Chapter 3. Setting Up Another Forms Path
49