Attaching Serial Cable - IBM 4247 A00 User Manual

DANGER
To attach a parallel cable:
1. Power off (O) the printer. Disconnect the power cord from the receptacle.
2. Standing behind the printer, insert the parallel interface cable into the lower
3. Push the clips at each end of the connector into the notches on the parallel
4. Refer to your computer system documentation for information on attaching the
5. After you complete the attachment of the computer end of the interface cable,
6. Power on (|) the printer.

Attaching Serial Cable

DANGER
124
4247 Printer Model A00 User's Guide
<3> To avoid personal risk, do not install or reconfigure a communication
port or a teleport during a lightning storm.
connector at the bottom left of the printer.
cable.
cable to your computer.
connect the power cord to the printer and to the electrical receptacle.
<2> To prevent serious personal injury from electrical shock when
connecting or disconnecting the interface cable, power off (O) the printer
and disconnect the power cord from the power source at the receptacle.