Slashed Zero; Restore Manufacturing Defaults - IBM 4247 A00 User Manual

v 2 to 136 (at 10 CPI and Prop)
v 2 to 163 (at 12 CPI)
v 2 to 204 (at 15 CPI)
v 2 to 233 (at 17.1 CPI)
v 2 to 272 (at 20 CPI)
To change or check the Right Margin:
1. Press Menu/Enter. The message PRINT OUT=NO displays.
2. Press
3. Press
4. Press
5. To exit from Program Configuration, press

Slashed Zero

You can set this value to:
No (default)
Yes
To change or check the Slashed Zero:
1. Press Menu/Enter. The message PRINT OUT=NO displays.
2. Press
3. Press
4. Press
5. To exit from Program Configuration, press

Restore Manufacturing Defaults

You can set this value to:
No (default)
Yes
To change or check the Manufacturing Default values:
1. Press Menu/Enter. The message PRINT OUT=NO displays.
2. Press
118
4247 Printer Model A00 User's Guide
until the message FORM SETTING displays.
until the message LINE SP=xxxxxxx displays, where xxxxxxx can be 6
LPI, 8 LPI, 12 LPI, 3L/30MM, 4L/30MM, 6L/30MM, 8L/30MM, or 12L/30MM.
until the message RIGHT MARGIN=xxx displays, where xxx can be a value
from 2 to 272 depending on your character-per-inch setting. If you want to select
a value other than the one displayed, press
displays. If you want to exit without saving the new value, press Menu/Enter.
If you want to save the new value, press
value is stored in NVM) or STORE=CURRENT (new value remains valid until the
printer is powered off (O)). Press Menu/Enter to save the new value.
All printed zeros will appear without a slash through them.
All printed zeros will appear with a slash through them.
until the message FORM SETTING displays.
until the message LINE SP=xxxxxxx displays, where xxxxxxx can be 6
LPI, 8 LPI, 12 LPI, 3L/30MM, 4L/30MM, 6L/30MM, 8L/30MM, or 12L/30MM.
until the message SLASH ZERO=xxx displays, where xxx can be NO or
YES. If you want to select a value other than the one displayed, press
displays. If you want to exit without saving the new value, press Menu/Enter.
If you want to save the new value, press
value is stored in NVM) or STORE=CURRENT (new value remains valid until the
printer is powered off (O)). Press Menu/Enter to save the new value.
Save the new values of the selected forms path.
Return to the manufacturing default values of the selected forms
path.
until the message FORM SETTING displays.
or .
until the message STORE=QUIT
to select either STORE=SAVE (new
or
until the message STORE=QUIT
to select either STORE=SAVE (new
or
or .