Relative Move Baseline (Esc J) - IBM 4247 A00 User Manual

the Power On Configuration menu, if the emulation mode is set to 4202 III XL, the
Change Font control code selects fonts compatible with the 4202 Proprinter III XL. If
the emulation mode is set to 2381 or Native 4247, Change Font selects the fonts
compatible with the 2381 Personal Printer.
Supported local font identifiers are shown in the following table.
00
01
02
03
04
05
06
07
08-0F
10
11
12-5F
60
61
62
63
64
65
66-FF
Notes:
1. If a downloaded font has not been previously downloaded with a Character Font
2. The NLQ font style is selected as defined in the Power On Configuration menu:

Relative Move Baseline (ESC J)

This control performs a vertical move relative to the current print position.
NN is a one-byte hexadecimal value that specifies the move amount in units of
1/216 inch. The printer will adjust the value to the nearest 1/144 inch. If Automatic
Carriage Return on Line Feed is set in the operator panel Power On Configuration
menu, a carriage return also is performed when a Relative Move Baseline code is
received (see "Carriage Return (CR)" on page 190).
202
4247 Printer Model A00 User's Guide
Local Font
Identifier Native 4247 and 2381 Emulation
(Hex)
Default (op. panel selection)
DP
DP Text
NLQ (Courier/Gothic)
DP Text Proportional
NLQ Proportional (Courier/Gothic)
DP
Reserved
Reserved
OCR-A
OCR-B
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Image Download control (CFID), a Change Font control to select a downloaded
font is ignored.
NLQ=GOTHIC or NLQ=COURIER.
1B 4A NN
Mode
DP
DP
DP Text
NLQ (Courier/Gothic)
DP (Download)
DP (Download)
DP Text (Download)
NLQ (Download)
Reserved
Reserved
Reserved
Reserved
Default (operator panel selection)
DP (Gothic)
NLQ Proportional (Courier/Gothic)
OCR-A
OCR-B
DP
Reserved
4202 III XL