IBM 4247 A00 User Manual page 78

11. From the back of the printer, insert the forms (with the print side facing down)
Figure 34. Installing Forms at the Rear of the Printer
12. From the front of the printer, place the left edge of the form under the forms
13. Move the right tractor to the left and under the form until the holes along the
14. If necessary, slide the right tractor either left or right to remove any slack in the
56
4247 Printer Model A00 User's Guide
through the rear tractor door. Guide the forms over the forms tractors.
jam sensor, and on the left tractor pins so that the form engages about three
left tractor pins. Close the left tractor door.
right edge of the form engage the same number of pins on the right tractor.
Close the right tractor door.
form, ensuring that the left and right tractor pins are centered in the holes of
the form. Hold the right tractor in place and lock the right locking-lever by
pushing it away from you.